We're here to help
Take a look below at some of the questions we get more often than others, or get in touch with us through your favorite social media. You can even pick up the phone and actually talk to a live person, if you're into that.
Where are Liberty Bottles Made?
They are made entirely in the UNITED STATES of AMERICA, by proud American Workers right here in Yakima, Washington. Next time you are in the Cascades call us and check out our factory tour schedule.
What is your Bottle Lining made of?
The “liner,” as it is often referred to is called PureShield. PureShield is an FDA approved, Food Grade, Flexible Coating. It has been independently lab tested and certified to be BPA, Lead and Phthalate free. So, what is it? Well... People like to call it a paint, but it is not. Unlike chemical laden paints and epoxies, PureShield is a polyester based powder coat that is applied dry and baked to a smooth glass-like surface. It is safe, and clean.
How do I wash my Bottle?
With a little soap, a little water and some elbow grease. So please hand-wash only and enjoy it for many years to come.
Can I recycle my Bottle?
You sure can. You can send it in to us and we will recycle it for you, or you drop it off anywhere you would normally recycle your aluminum cans. Our caps are made from #5 plastic and can also be recycled.
Can I buy custom bottles in bulk?
Yes, we have a team of extremely specialized graphic designers that know how to make bottle designs that speak both to your brand and our cutting edge print technology. If you can buy at least 72 of them then give us a call or contact [email protected] for more information. Lets make it cool, let’s make it custom, and let’s make it you.
What about the cap, can my seal get funky?
Yes, it can if you don’t care for it properly. Simply take the seal out of the cap and hand wash it with warm soapy water, let it dry completely and put it back into the cap.
Just how “Green” is my Liberty Bottle?
Rest assured, your purple bottle with pink pigs on it is actually green. We spent over two years developing the processes and procedures to not only make a product from recyclable materials, but made in manner rooted in Environmental Stewardship. We built a factory filled with state of the art equipment, which uses less energy, cleans our wastewater, and conserves resources. We even recycle our own scrap. We want the world to know that the good ole’ USA cannot only make awesome products, but we can make them greener here than anywhere else on the planet.
Is there a warranty?
You bet, there is. Our bottles are proudly made in America by American Workers. We stand behind them. However, our warranty does not cover bottles damage from dishwashers, moldy cap seals, or cap nozzles that have been chewed on.
What all can I do with my Liberty Bottle?
Climb, ride, skateboard, parachute, drive race cars, hike, roller derby, horse jump, hunt, play checkers, shuffle board, work, ski, sail, fish for Mississippi River Giant Catfish, prospect for gold, kite flying, crocheting, owl pellet collection, and ... No that’s it. If it’s not on that list, we wouldn’t do it. Of course we cannot promise your safety while doing those things, especially the owl pellet collection (don’t ask). So do them at your own risk. Oh yeah, with our standard cap you can use it as an Adventure Growler. But do not use it as such with the before mentioned activities.
Can I buy your Bottles in stores?
Yes, please do. Although we would be happy to sell you a bottle or two from libertybottles.com, we would love for you to support your local retailer. Those local retailers are the backbone of our country. Support em’. We are all the better for it. Please see the dealer locater for more information.
Returns and Exchanges?
We’re not sure why you would ever want to return one but ...yeah, we’ll help you out if as long as it is in an unused condition, in the original packaging and when ordered from our website within the last 30 days.
Can I order over the phone?
Sure, we would love to hear from you. Give us a call; order a bottle or, just call to say hi.
Can I screen print on a Liberty Bottle?
Well, sure, we guess you could if you want an old school bottle. Or, if you wanna be like the hip, cool kids you would want it to be Cylindrically Digital Printed. That’s right. That’s how we roll. Cylindrical Digital Printing is the most advance method of putting graphics on bottles and we are the only people that can do it.
I received my Bottle and it has a funny smell to it, what do I do?
Since our bottles are primarily made to order – and in the USA, that means there isn't a lot of time for them to air out. So just fill it with hot (be careful not to hurt yourself) soapy water and let it sit overnight. Wash out in the morning and enjoy.
What about a double insulated Bottle?
We are working on bringing vacuum bottle technology back to the USA. Easier said than done. Currently only bottles made in some far off place come vacuum insulated. So not yet, but all in due time. In the mean time, enjoy the lighter single wall option.
I received my Bottle with a Sports cap and it makes a funny sound, what do I do?
Here is a little information about the “dolphin cap noise”. If you use one of our straws (sold separately) in the sports cap, it will stop the noise. However, some people don’t like to use the straws. You can call into customer service and we can get you a bag of 4 for $5 but I’m hoping the following information will do the trick for you. Let me know if it doesn’t and we can replace your sports cap with a standard cap. Take the cap off, flip the nozzle up and run warm to hot water (please be careful) directly onto both sides of the umbrella valve (black round rubber disk thing on the underside of the cap about the size of a dime) for a couple of minutes. It usually relaxes it and allows the air to flow better, which gets rid of the whistle noise.
Can I put hot water inside my Bottle?
Yes, but it will be hot to the touch – be careful! Also, do not heat our bottle on a burner or campfire – it will destroy the bottle.
My Bottle Lining is cracked/peeling/flaking, am I going to get sick?
Your bottle is still safe to drink from thanks to our non-toxic, non-leaching coating. The reason we have a liner on the inside of our bottles is simply to create a non-porous surface that stays cleaner and allows your water to taste like water (rather than metal). The only health concern associated with a cracked liner is that now there is a potential location for microorganisms to live, please contact us to see if you are eligible for a replacement warranty bottle.
My Sports cap leaked water in my backpack, how can I prevent this from happening?
As we know there are several factors that will influence a sealed container. Changes in temperature, altitude and barometric pressure will create a difference in air pressure between the inside of a closed bottle. The more air that is inside the bottle (when it’s close to empty) the more apparent this process becomes because there is more gas available to compress or in this case expand. The straw is responsible for directing water out the mouthpiece rather than the expanded air. We've found that the only sure way to completely avoid the leaking is to use the standard cap.
Can I Work for Liberty BottleWorks?
Only if you believe in environmental stewardship and that making product in America is not only a duty, but also an honor. You also must be able to skip count to 119 by sevens and name the Capital of Alabama. If you think you can meet this stringent, weed-out criterion then send your resume to [email protected]
The Liberty Quality Guarantee
Our bottles are proudly made in America by American Workers. We stand behind them. However, our warranty does not cover bottles damage from dishwashers, moldy cap seals, or cap nozzles that have been chewed on. If you don’t love your bottle, contact [email protected] within the first 30 days to see if you are eligible for a return.
Let us know if you have questions.
Liberty Bottleworks
2900 Sutherland Drive
Union Gap, WA 98903
tele. (509) 834-6500
fax (509) 494-0189
Our factory offices, and Liberty Bottle retail boutique are open Monday thru Friday, 8am - 4:30pm.
Get Directions
Other ways to get in touch. Select a department below to drop us an email.
Your Account
Customer service
Sales/wholesale information
Custom bottle inquiries
Community involvement and sponsorship
Affiliate marketing inquiries
Art submission questions
Employment inquiries